9-35
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter9 Working with Logging and Reports Service Logs
These files are located in the \Logs subdirectory of the applicable service’s
directory. For example, the following is the default directory for the CiscoSecure
authentication service:
c:\Program Files\CiscoSecure ACS v2.6\CSAuth\Logs
The most recent debug log is named as follows:
SERVICE.log
where SERVICE is the name of the applicable service.
Older debug logs are named with the year, month, and date they were created. For
example, a file created on July 13, 1999, would be named as follows:
SERVICE 1999-07-13.log
where SERVICE is the name of the applicable service.
If you selected the Day/Month/Year format, the file would be named as follows:
SERVICE 13-07-1999.log
Configuring Service Logs
You can configure how CiscoSecure ACS generates and manages the service log
file. The options for configuring the service log file are listed below.
•Level of detail—You can set the service log file t o contain one of three le vels
of detail:
–
None—No log file is generated.
–
Low—Only start and stop actions are logged.
–
Full—All services actions are logged.
•Generate new file—You can control how often a new service log file is
created:
–
Every Day—Cisco Secure ACS generates a new log file at 12:01 A.M.
local time every day.
–
Every Week—Cisco Secure ACS generates a new log file at 12:01 A.M.
local time every Sunday.