Chapter3 Settin g Up the CiscoSecure ACS HTML Interface
Advanced Options
3-6
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version. 3.0
•Network Device Groups—When selected, this option enables network
device groups (NDGs). When NDGs are enabled, the Network Configuration
section and parts of the User Setup and Group Setup pages change to enable
you to manage groups of network devices (AAA clients or AAA servers).
This feature is useful if you have many devices to administer.
•Voice over IP (VoIP) Group Settings—When selected, this feature enables
the VoIP option on the Group Setup page.
•Voice-over-IP (VoIP) Accounting Configuration—When selected, this
feature enables the VoIP Accounting Configuration option on the System
Configuration page. This option is used to determine the logging format of
RADIUS VoIP accounting packets.
•ODBC Logging—When selected, this feature enables the ODBC logging
sections on the Logging page of the System Configuration section.
Setting Advanced Options for the Cisco Secure ACS User Interface
To set advanced options for the CiscoSecure ACS HTML interface, follow these
steps:
Step 1 Click Interface Configuration.
Step 2 Click Advanced Options.
Result: The Advanced Options table appears.
Step 3 Select each option that you want displayed (enabled) in the Cisco Secure ACS
HTML interface.
Caution Disabling an advanced option in the Interface Configuration section does not
affect anything except the display of that function in the CiscoSecure ACS
interface. Settings made while an advanced option was active (selected)
remain in effect when that advanced option is no longer displayed in the
interface (de-selected).