Chapter8 E stablishing CiscoSecure ACS System Configuration
CiscoSecure Database Replication
8-18
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Step 5 If the secondary Cisco Secure ACS server is to receive replication components
from only one primary Cisco Secure ACS server, from the Accept replication
from list, select the other Cisco Secure ACS server name.
Note The primary Cisco Secure ACS servers available in the Accept
replication from list is determined by the AAA Servers table in the
Network Configuration section. For more information about the AAA
Servers table, see the “AAA Server Configuration” section on
page 4-15.
Step 6 If the secondary Cisco Secure ACS server is to receive replication components
from more than one primary Cisco S ecure ACS server, from the Accept
replication from list, select Any Known CiscoSecure ACS for Windows
2000/NT Server.
The Any Known CiscoSecure ACS for Windows 2000/NT Server option is limited
to the Cisco Secure ACS servers listed in the AAA Servers table in Network
Configuration.
Step 7 Click Submit.
Result: Cisco Secure ACS saves the replication configuration, and at the
frequency or times you specified, CiscoSecure ACS begins accepting the
replicated components from the other Cisco Secure ACS servers you specified.
Replicating Immediately
You can manually start database replication.
Note Replication cannot occur until you have configured at least one secondary
Cisco Secure ACS server. For more information about configuring a
secondary Cisco Secure ACS server, see the “Configuring a Secondary
Cisco Secure ACS Server” section on page 8-17.