Chapter6 Setting Up and Managing User Groups
Configuration-specific User Group Settings
6-16
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Configuring Ascend RADIUS Settings for a User Group, page6-37
Configuring Cisco VPN 3000 Concentrator RADIUS Settings for a User
Group, page 6-38
Configuring Cisco VPN 5000 Concentrator RADIUS Settings for a User
Group, page 6-39
Configuring Microsoft RADIUS Settings for a User Group, page6-41
Configuring Nortel RADIUS Settings for a User Group, page6-42
Configuring Juniper RADIUS Settings for a User Group, page6-44
Configuring Cisco BBSM RADIUS Settings for a User Group, page 6-45
Note RADIUS (Cisco Aironet) is not an option since there are no Cisco
Aironet-specific VSAs. The length of user session timeouts is controlled by
IETF RADIUS attribute 27, Session-Timeout.
Note When a vendor-specific variety of RADIUS is configured for use by network
devices, the RADIUS (IETF) attributes are available because they are the base
set of attributes, used as the first 74 attributes for all RADIUS vendors.
The content of these subsections is dynamic and based on two factors as follows:
For a particular protocol to be listed, a AAA client must be configured to
authenticate using that protocol. For more information, see the AAA Client
Configuration section on page 4-8.
The specific attributes for a particular protocol must be configured for display
at the group level. For more information, see the Protocol Configuration
Options for TACACS+ section on page3-7 or the Protocol Configuration
Options for RADIUS section on page 3-10.