6-27
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter6 Setting Up and Managing User Groups Configuration-specific User Group Settings
Note If there is more than one pool in the Selected Pools list, the users
in this group are assigned to the first available pool in the order
listed.
Tip To change the position of a pool in the list, select the pool name and click Up
or Down until the pool is in the position you want.
Step 5 To save the group settings you have just made, click Submit.
For more information, see the “Saving Changes to User Group Settings” section
on page 6-50.
Step 6 To continue specifying other group settings, perform other procedures in this
chapter, as applicable.
Assigning a Downloadable PIX ACL to a Group
The Downloadable ACLs feature enables you to assign a PIX Access Control List
(ACL) at the group level.
Note You must have established one or more PIX ACLs before attempting to assi gn
one. For instructions on how to add a downloadable PIX ACL using the Shared
Profile Components section of the Cisco Secure ACS HTML interface, see the
“Adding a Downloadable PIX ACL” section on page5-3.
Tip The Downloadable ACLs table does not appear if it has not been enabled. To
enable the Downloadable ACLs table, click Interface Configuration, click
Advanced Options, and then select the Group-Level Downloadable ACLs
check box.