9-7
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter9 Working with Logging and Reports About Cisco Secure ACS Logs and Reports
•Configuring a TACACS+ Administration Log—The steps for configuring
a TACACS+ Administration log vary dependin g upon which format you want
to use. For more information about log formats, see the “Logging Formats”
section on page 9-1.
–
CSV—The default location for CSV TACACS+ Administration files is
Program Files\CiscoSecure ACS vx.x\Logs\TACACS+Administration.
For instructions on configuring the CSV TACACS+ Administration log,
see the “Configuring a CSV Log” section on page 9-22.
–
ODBC—For instructions on configuring the ODBC TACACS+
Administration log, see the “Configuring an ODBC Log” section on
page 9-27.
RADIUS Accounting Log
The RADIUS Accounting log contains the following information:
•User sessions stop and start times
•AAA client messages with username
•Caller line identification information
•Session duration
You can configure CiscoSecure ACS to include accounting for Voice over IP
(VoIP) in the RADIUS Accounting log, in a separate VoIP accounting log, or in
both places.
Topics regarding this log include the following:
•Enabling a RADIUS Accounting Log—You can enable the RADIUS
Administration log in either CSV or ODBC format.
–
CSV—For instructions on how to enable the RADIUS Accounting log in
CSV format, see the “Enabling or Disabling a CSV Log” section on
page 9-19.
–
ODBC—For instructions on how to enable the ODBC RADIUS
Accounting log, see the “Configuring an ODBC Log” section on
page 9-27.
•Viewing a RADIUS Accounting Report—For instructions on viewing the
RADIUS Accounting report in the HTML interface, see the “Viewing a CSV
Report” section on page 9-20.