4.Click OK to return to Make New Direct Connection dialog and click on TCP/IP Settings…. Currently, Clarinet supports the specification in the General TCP/IP dialog box. Again, no change is required although it
would be helpful to understand what is entailed in these dialogs.
Note: Support of some of the items is negotiated as the connection session begins. The EthIR Switch from which the EthIR Beam is extended automatically assigns the IP address of your HPC. SLIP protocol is not supported. Software compression and IP header compression are negotiated. The EthIR Switch assigns the HPC IP address. Compression is not supported.
5. Click on the Name Servers tab.
6.The domain name server are configured in the Switch and do not have to be configured into the CE device. The Switch passes all information to the CE device.
