Configuring Windows CE Handheld PCs

This section describes

How to configure your HPC to connect to the Clarinet EthIR Switch.

How to start and end a connection once configuration is done.

How to specify the HTTP proxy server in Pocket Internet Explorer.

Adding Direct Connection to Remote Networking

Each Windows CE HPC is bundled with a Microsoft Windows CE communication package that enables you to add and configure a new connection to a remote networking system. Follow the following step to add a new remote connection:

1.Select Start\Programs\Communication\Remote Networking menu from the task bar, as illustrated below.

2.Double click on Make New Connection, which brings up the Connection Configuration dialog. Enter a name for the new connection and specify it as a direct connection, as illustrated below.

3. Click Next to display the Make New Direct Connection dialog. Select Infrared Port as the device. Typically, each HPC has a built-in infrared.

Note: It is unnecessary to click the Configure button because no change is required to the default settings in Device Properties.

F-14

Page 64
Image 64
Clarinet Systems EthIR LAN manual Configuring Windows CE Handheld PCs, Adding Direct Connection to Remote Networking