60 | Advanced Configuration ~ Presets |
| The four macros (one for each configuration) are set up as follows: |
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
When the room is in Configuration 1, running the Configuration 2 macro will change the presets to the following states:
•P1 does not change because the flag is already set (1)
•P2 and P3 clear their states (0) so they can be run
•P4 runs and sets its state to on (1) which prevents other presets from rerunning it
•P5 and P6 clear their states (0) so they can be run
When the room is in Configuration 3, running the Configuration 1 macro will change the presets to the following states:
•P1 and P2 run and set their state to on (1) which prevents other presets from rerunning them
•P3 does not change because the flag is already set (1)
•P4, P5, and P6 clear their states (0) so they can be run
For more detailed information on creating macros, see the Macros section on the next page.
