Creating Floppy Disk Copies

22	System Configuration ~ Installing G-Ware

✍ To select an alternate destination directory, click Browse and use the Choose

Directory window to find the desired location. Click OK to return to the previous window.

Figure 3.1. Desktop icon

Depending upon the computer equipment you have available, you might need to install G-Ware software from floppy disks rather than the included CD. To do this, a Disk Copy program is provided in G-Ware that allows you to transfer G-Ware to floppy disks. You will need a PC with a CD-ROM drive to make the transfer. You can access the Disk Copy program in the following ways:

•After installing G-Ware, go to the Windows® Start menu, select Programs, then ClearOne G-Ware, then Create Install Floppy Disks.

– or –

•In the G-Ware section of the Audio Video Product CD, click on Install Now. Choose Create Installation Floppy Disks from the G-Ware setup menu.

Installing G-Ware

To install G-Ware

1.Boot the PC to the Windows operating system. Ensure that all other programs or applications are closed. Insert the Audio and Video Products CD into the CD-ROM drive.

If the Autorun feature is enabled on the PC, the ClearOne Welcome window opens. Click the Software tab and select G-Ware.

If the Autorun window does not open, open the Windows Start menu and choose Run. Type “<drive>:\\clearone.exe” where <drive> is the letter of the CD-ROM drive (e.g., D:\\clearone.exe).

2.At the G-Ware window, click Install Now near the bottom of the window.

3.Select Install G-Warefrom the setup menu. The InstallShield Wizard opens, and guides you through the Welcome and License Agreement windows. At the Choose Destination Location window, choose the directory where G-Ware will be installed. We recommend that you use the default directory.

4.Click Next or Yes to move to proceed through the windows that follow or No or Cancel to end the installation process.

5.Follow the onscreen instructions. You must restart your computer once installation is complete.

The G-Ware Program Folder is now added to your Start menu. You can start G-Ware through the Start menu or by double-clicking the desktop icon.

ClearOne comm PSR1212 Creating Floppy Disk Copies, Installing G-Ware, To install G-Ware

Models: PSR1212