System Configuration ~ Processing
Figure 3.48. Low/Mid/High Loudspeaker Driver configuration
Refer to the figure above. Note that as you create filters across several processing channels, you can observe their crossover points and general shape of the frequency response. In this case, several
Delay
Click Delay to open the Delay configuration window. Delay calibrates the amount of signal delay introduced, based on the length (the distance between the source and audience) and temperature you enter.
Figure 3.49. Delay window
For example, different speaker drivers within a speaker enclosure might be located different distances from the listening area because of design constraints within the box. You can set up to 500ms of delay.
51
✍ If you don’t want delay added to the signal, select the Bypass Delay box.
The Calculated | Delay | |
✍ reading | reflects | any |
