114, Mline Mic/Line Adjust | ClearOne comm PSR1212 manual

114	Appendices ~ Appendix E: Serial Commands

Once the	command	is
✍ given, the unit responds by
echoing	back	the

command, followed by “RE- ENTER PASSWORD” string. The command must then be re-entered exactly as entered previously. Then, the command will be echoed back, followed by an “OK,” indicating that the password has been changed.

MLINE - Mic/Line Adjust

This command selects/reports the setting of coarse gain adjustment on the input channels 1-8. The three settings are 0dB, 25dB, and 55dB.

Command form: DEVICE MLINE <Channel>[Value]

Argument details

Name	Description
Device	0–7 or * to select all units
MLINE	Command form
Channel	1–8 (selects mic inputs)
Value	0 = 0dB (line level), 1 = 55dB, 2 = 25dB, Null = current level
Example:	#43 MLINE 1 2 On PSR1212 unit 3 (#43), the mic/line (MLINE)

setting for input 1 is 25dB (2).

MMAX - Maximum Number of Microphones

This command selects/reports the maximum number of microphones for each gating group.

Command form: DEVICE MMAX <Channel> [Value]

Argument details

Name	Description
Device	0–7 or * to select all units
MMAX	Command form
Channel	1–4, A-D (gating groups)
Value	0 = Unlimited, 1–8 = Maximum number of mics
	Null = Current maximum number of microphones

Example: #42 MMAX A 4 On the PSR1212 unit 2 (#42), the max number of mics (MMAX) in gating group A that are allowed to gate on at any one time is 4.

MPASS - Modem Password

This command sets the current password setting for the unit when using modem mode. The password must be entered in twice.

Command form: DEVICE MPASS [String]

Argument details

Name	Description
Device	0–7 or * to select all units
MMAX	Command form
String	0-12 characters, CLEAR = to clear the current password
	Null to report the current password

Example: #40 MPASS CLEARONE On PSR1212 unit 0 (#40), the modem

password (MPASS) is set to CLEARONE.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Image 120

ClearOne comm PSR1212 operation manual 114, Mline Mic/Line Adjust, Mmax Maximum Number of Microphones, Mpass Modem Password

Contents

PSR1212 Digital Matrix Mixer PSR1212 Installation ClearOne Part No June 2002 Rev Table of Contents Advanced Configuration System Configuration Control Appendices Technical Services Group ~ 1-800-283-5936 USA ~ Introduction Product overview New Features Professional Services Group Sales and Customer ServiceTechnical Support ClearOne Communications EuMEA GmbH Unpacking Controls and ConnectionsFront panel Rear panel Introduction ~ Controls and Connections Introduction ~ Controls and Connections Networking Expansion bus Power Equipment placementOperational Requirements Environmental Installation Hardware Setup Installation ~ Hardware Setup To connect the unit Installation ~ Networking Units Networking UnitsExpansion bus connections To create an expansion bus network Mixer mode To select a mixer modeDevice IDs To assign device IDs Installation ~ LCD Programming LCD ProgrammingLCD menu tree Pressing Esc at the top of the tree does nothing To adjust a parameter Select PresetSystem menu Run Macro RS-232 menu Enable Modem Clear PasswordMeter menu Flow Control hardware Inputs menu Outputs menu Gain Matrix Technical Services Group ~ 1-800-283-5936 USA ~ System Configuration Ware Requirements Installing G-Ware To install G-WareCreating Floppy Disk Copies Site Setup Creating a new siteTo create a new site Adding a PSR1212 To auto-detect unitsTo manually add units Select the PSR1212 icon and click Add Configuring Unit Properties To configure Unit Properties System Configuration ~ Site Setup System Configuration ~ G-Ware Screens Ware ScreensFlow Screen Copying and pasting settings Safety MuteStatus bar Matrix Screen 20. G-Ware Matrix Screen Audio Routing Expansion bus O-Z routingProcess A-H routing Cross point attenuation System Configuration ~ Audio Routing Matrix report Inputs and Outputs Inputs Pwr Phantom Power FiltersActive Filter Type Table View To configure filters GateActivation NOM count Manual Off deactivates the mic PA Adaptive Mode Chairman OverrideAdaptive Ambient Gate Ratio Decay Rate PA Adapt and AEC Reference To create a virtual reference Click Close to exit the window To configure gating group settings Gating Group SelectTo assign a gating group Click the Gating Group label to change the group names Min/Max limits Meters 38. Inputs 9-12 Configuration window 40. Gain meters Outputs NOM Optimizing output gain structure Expansion Buses From Expansion Bus O-ZTo Expansion Bus O-Z Processing Processing A-H Cmprs compressor CompressorsGroup 47. Processing Filters window Phase BypassAdd Filter Remove Filter Delay Changes you make in the distance and temperature fields 50. Process Gain adjust and meter Optimizing process gain structure Presets Creating PresetsOverview Preset Configuration pane Affected when the preset is runPreset password is set in the Unit Properties window see Advanced Configuration ~ Presets Assigning virtual references to the preset To create a preset Storage space Running presets Running multiple presets simultaneouslyTo run a preset using G-Ware To run a preset using front panel control All presets are ready to run again Room combining example Four macros one for each configuration are set up as follows To create a macro using Macro Recorder MacrosCreating macros To create a macro using Macro Editor 16 Macro Name window To add or insert a command line Editing macrosTo edit a macro To delete a macro To run a macro using G-Ware To run a macro using front panel controlTo run a macro using the Select panel or Gpio Running macros Signal Generator UtilitiesTo use pink or white noise Select the PSR1212 Unit and Input Channel you want to use Document Compare Utility To use toneTo compare site files Operation ~ Utilities Open window Copying settings Print Preview window Print Reports Print Reports window To upgrade firmware GFirm Firmware UtilityToolbar Button 13. Selecting baud rate Ware Switcher Copy and paste settingsTo use G-Ware Switcher Message Log Monitoring ViewsGate View Operation ~ Monitoring Views To configure Meter Views Meter Views To program control/status pins Gpio BuilderControl/Status a Remote Builder XAP IR RemoteControl ~ Remote Builder Select IR Remote default from the Select Remote Type list ClearOne Control PanelsControl ~ Remote Builder To program the XAP IR Remote To program the Volume panel Control ~ Remote Builder To program the Select panel Select Panel selected in the Remote Builder Remote Modem Access Serial commandsRS-232 Port Command strings To create a command stringTo run a command string Control ~ RS-232 Port Technical Services Group ~ 1-800-283-5936 USA ~ Appendix a Specifications All nine pins be connected to Appendix B PinoutsPin Number Pin Number Control Control/Status connectors Pin Definable Type Default DescriptionFirst 16 pins on Appendices ~ Appendix B Pinouts Preset select bit Control/Status B port pinout+5VDC, 300mA RS-485 Remote Panel a and B connectors Set connector pinoutLine connector pinout Pin Description Connecting the Control Panel Appendix C Control Panel Appendices ~ Appendix C Control Panel 800 ft/244 m Figure C.6. Volume Control Panel Assembly Appendix D Accessories Appendices ~ Appendix D AccessoriesAccessory ClearOne Part Number Appendix E Serial Commands Command structureConventions Example Appendices ~ Appendix E Serial Commands Groups and channelsType and device IDs Unit type Serial command error codes Error number Text message Explanation/SolutionMeter type definitions PSR1212 Serial commands Command Function Selects/reports NOM setting on output Selects/reports off attenuation mode forSelects/reports signal generator activation Channels Aamb Adaptive Ambient Mode Amblvl Ambient Level AdjustAGC Automatic Gain Control Argument details Chairo Chairman Override Mode Baud Baud RateCgroup Compressor Group Select Compress Compressor Adjust Compsel Compression SelectGain of 3dB Decay Decay Adjust Delay Delay AdjustDelaysel Delay Select 100 Dfltm Default Meter 101Did Device ID Channel Group Filter Filter Adjust 102Examples Name Description Units FMP First Mic Priority Mode 103Filtsel Filter Select Flow Flow Control Gain Gain Adjustment 104FPP Front Panel Passcode Button assignment GHOLD- Gate Hold Time Adjust 105Gate Gate Status Example Gmode Gating Mode Gratio Gate Ratio Adjust106 Gover Gating Override Greport Gate Report Grpsel Gating Group SelectLabel Label 107 LMO Last Mic On Mode Lock Preset and Macro Lock108 LFP Lock Front Panel Lockprst Apply the lock to a preset or macro Lockpwd Set preset/macro password109 LVL Level 110 Lvlreport Level ReportLvlrrate Level Report Rate = Toggle Master Expansion Bus Master Mode MAX Maximum Gain SettingThis setting will affect all relative gain adjustments Macro Macro Execution/Reporting Mdmode Modem Mode MIN Minimum Gain Setting112 Minmax Minimum and Maximum Gain Setting 113Minit Modem Initialization String Mline Mic/Line Adjust Mpass Modem Password114 Mmax Maximum Number of Microphones Mtrxlvl Matrix Attenuation Adjustment 115Mtrx Matrix NOM Number of Open Microphones Mode Offa Off Attenuation Mode116 Mute Mute PAA PA Adaptive Mode PP Phantom PowerPreset Preset Execution/Reporting 117 118 Prgstring Program StringSupported special characters String location Ramp Ramp Gain Adjustment 119Refsel PA/AEC Reference Select Name Description Unit Refset Reference channel setup Sermode Serial Mode120 Serecho Serial Echo Sftymute Safety mute Siggen Signal Generator121 Sigtout Signal Generator Time Out 122String String Execution Tout Time Out Select Command Value Null to return value 123UID Unit ID VER Version Appendix F Warranty 124 Appendices ~ Appendix F Warranty 125 Safety Information 126Appendix G Compliance FCC Part 15 Compliance 127 Glossary 128 Glossary 129 130 131 132 133 Signal Delay Used for 134 135 136 Index 137 Index Phase 138Frequency response 139