Installation and Configuration
Setting Up Connection Point CP-2E
To set up your Connection Point
Using the Installation Wizard
1.Open a web browser.
2.Type cp.home into the Address field and press Enter. You may also type in the base address, which is 192.168.1.1. The Quick Setup Wizard will begin.
Choosing the Internet Connection Method
Connection Point will automatically attempt to connect to the Internet. If connection is established, proceed to the Timezone setup section. If connection is not established, perform the following procedures:
1.On the Connection Method screen, if you are unsure of which method to use, click I’m not sure. A Help screen appears giving you additional information to assist in your selection.
iPAQ Connection Point |
