Compaq CP-2E manual Excluded IP Addresses

Advanced Setup Icons

3.Type the IP address that you wish to reserve into the IP Address field. The IP address you specify must be within the pool of valid IPs available to the integrated DHCP server.

4.Type the MAC address of the PC on the local network for which you wish to reserve the specified IP address into the MAC Address field. Refer to Appendix B for a complete discussion of identifying MAC addresses.

5.If you wish, you can type a brief description into the Comment field.

6.Click Apply. The Connection Point CP-2E must be rebooted for applied changes to take effect.

7.Click OK. You can reboot the Connection Point CP-2E at any time by clicking the Reboot button at the left.

Excluded IP Addresses

You can exclude a specific IP address within the DHCP server leasing pool from being leased out. This is useful for assigning static IP addresses to devices on the local network. IP addresses listed in the Excluded IP Table are not assigned to client devices by the DHCP server.

iPAQ Connection Point CP-2E User Guide 5–17