Compaq CP-2E manual LAN Status

Connection Point CP-2E Home Page

Hardware Version: Displays the hardware version of your Connection Point CP-2E.

Software Version: Displays the version of the software installed on the Connection Point CP-2E. This changes whenever you install a software upgrade.

Current Time: Displays current time based upon timezone.

Time since last boot: Displays the time that has elapsed since the Connection Point CP-2E was last started.

LAN Status

LAN MAC Address: Displays the Ethernet MAC address of the LAN interface of the Connection Point CP-2E. A MAC address is expressed in six 2-digit hexadecimal number pairs.

IP Address: Displays the IP address of the local LAN interface of the Connection Point CP-2E. This IP address is also used as the LAN gateway address and DNS server address.

Subnet Mask: Displays the local subnet mask of the LAN interface of the Connection Point CP-2E. The default subnet mask is 255.255.255.0.

DHCP: Displays the status (enabled or disabled) of the internal DHCP server.

DHCP Start Address: Displays the first IP address in the DHCP allocation pool. The internal DHCP server allocates IP addresses to client computers with the start address as the low end of the address range.

DHCP End Address: Displays the last IP address in the DHCP allocation pool. The internal DHCP server allocates IP addresses to client computers with the end address as the high end of the range.

iPAQ Connection Point CP-2E User Guide 4–3