Compaq CP-2E manual Enabling Packet Filtering

Advanced Setup Icons

IP Rules: The IP Rules Status page shows destination IP addresses that are blocked. Packets that have destinations matching any of these addresses are discarded.

Port Rules: The Port Rules page displays port and protocol combinations that are blocked. Packets of the matching port number and protocol type are discarded. You can add new port/protocol filtering combinations. Several predefined port mappings are included.

Enabling Packet Filtering

1.Click the Packet Filtering link at the left. The Packet Filtering page is displayed.

2.Use the pulldown menu to select Enable in the Packet Filtering field.

3.Click Apply. The Connection Point CP-2E must be rebooted for applied changes to take effect.

4.Click OK. You can reboot the Connection Point CP-2E at any time by clicking the Reboot button at the left.

iPAQ Connection Point CP-2E User Guide 5–11