Compaq CP-2E manual Advanced Setup Icons

Advanced Setup Icons

2.Click Add. The Add BOOTP IP page is displayed.

3.Type the IP address that you wish to assign to the specified MAC address into the IP Address field. The IP Address you specify must be within the pool of valid IPs available to the integrated DHCP Server.

4.Type the MAC address of the PC to which you wish to assign the specified IP address into the MAC Address field. Refer to Appendix B for a complete discussion of identifying MAC addresses.

5.If you wish, you can type a brief description into the Comment field.

6.Click Apply. The Connection Point CP-2E must be rebooted for applied changes to take effect.

7.Click OK. You can reboot the Connection Point CP-2E at any time by clicking the Reboot button at the left.

5–20 iPAQ Connection Point CP-2E User Guide