Compaq CP-2E manual Restore Factory Defaults

System Recovery

3. Follow the wizard directions.

Restore Factory Defaults

There are three ways to restore factory defaults:

>Use the firmware update procedure described above.

>Click the Reset Factory Defaults button on the System page of the Advanced Setup tab. Refer to Chapter 6 for more information.

>Hold down the reset button on the back of the Connection Point CP-2E for ten seconds. Refer to Chapter 1 for the location of the reset button.

Each of these procedures restores all factory defaults to the Connection Point CP-2E. Any configuration changes you have made will be lost.

6–2 iPAQ Connection Point CP-2E User Guide