
Using
the button to select the Macro 2 function and print the <PROTOCOL> option and its values.
3.Print the menu of the left margin option.
Since you do not want to change other than the left margin, press the button to select the current protocol. Bolded PORT DEPND is underlined and the next option <PRTCL SERL> is printed. (Bolded value indicates the current setting and underlined value is
the new setting.) Repeatedly press the button in the same way, until the <LEFT MARGN> option and its value are printed.
4.Change the left margin from column 1 to column 20.
Press and hold the button until the printer beeps nineteen times. When the button is released, the new value is printed next to the current value. If the new value is not
20 COL, repeat this operation. If it is 20 COL, press the button to select 20 COL. 20 COL is underlined and the next option <TOP OF FRM> and its value are printed.
5.Exit the Macro 2 function.
Since you do not want to make any other changes in MACRO 2, press the Exit/Save button. The <FUNCTIONS> menu is then reprinted and the red cursor is positioned beneath SAVE&EXIT.
6.Exit the
Press the button or the
button to save 20 columns as the new
Press the
Options with Both Pre-determined and Undetermined Values
Some options include both types of values. Undetermined values appear at the end of the list of
For example, when you select the <FORM LENGH> option (Form Length), the following menu is printed as follows:
<FORM | LENGH> |
|
|
|
|
|
|
|
| |
3 | INCHES | 3.5 | INCHES | 4 | INCHES | 5.5 | INCHES 6 | INCHES 7 | INCHES 8 | INCHES 8.5 |
INCHES | 11 | INCHES |
|
|
|
|
|
|
| |
11 2/3INCH | 12 | INCHES | 14 | INCHES | 15 | INCHES | No of LINE |
|
|
1.Select the No of LINE value.
A new option menu with undetermined values is printed.
2.Change the value according to the previous procedure.
The chart on the next page summarizes how to select options such as protocol and font and how to use the functions that do not have options.