|
| Using |
|
|
|
MACRO | 1 and |
|
MACRO | 2 Options Values | Description |
|
| |
Continued | CR=LF+CR: A line feed is added to each carriage | |
|
| return. |
LF=LF: No carriage return is added to a line feed.
LF=LF+CR: A carriage return is added to each line feed.
<PAPER SRC> |
| Specify the paper input source. This setting is valid |
(Paper Source) |
| immediately after powering on. After that, the paper |
|
| source follows the setting of the paper select lever. |
| TRACTOR | Continuous forms selected |
| MANUAL | Single sheets selected |
| RSVD 1 | Reserved |
| RSVD 2 | Reserved |
| RSVD 1/2 | Reserved |
|
|
|
<PRINT DIR> | UNIDIR | Unidirectional printing. Unidirectional printing is |
(Print Direction) |
| used for the printing that needs the precise vertical |
|
| alignment. Unidirectional printing is slower than |
|
| bidirectional printing. |
BIDIR
SOFT CNTRL
(Software Con- trol)
Bidirectional printing. The printer prints in either direction while seeking the next print direction for a shorter print time. The unidirectional command is ignored.
The print direction follows a command from the computer. If no command is sent, print direction is bidirectional.
