Cornelius R-404A REFRIGERANT Frozen Product, Consistency Varies, Excessively, Freeze-Up

Trouble		Probable Cause		Remedy
FREEZE CYLINDER DOES	C.	Lines restricted.	C.	Sanitize Unit as instructed.
NOT REFILL AT ALL TIMES
WHEN DISPENSING. (cont’d)
FROZEN PRODUCT	A.	Dispensed product BRIX
CONSISTENCY VARIES		varying because:
EXCESSIVELY.
		Syrup and/or water flow		a. Clean regulator(s).
		regulator sticking.
		Primary CO2 regulator		b. Primary CO2 regulator must be
		pressure insufficient.		adjusted from 80 to 100-psi.
	B.	Cylinder freeze-up causing	B.	Refer to CYLINDER
		ice formation in center of		FREEZE-UP.
		cylinder and liquid product
		channels around ice
		formation.

NOTE: DEFROST AFFECTED FREEZE CYLINDER

AS INSTRUCTED.

CYLINDER FREEZE-UP.	A. Dispensed product BRIX too
	low.

A.Refer to BRIX (Water-to-Syrup) ‘‘Ratio’’ too low.

B. Viscosity of dispensed product	B. Adjust dispensed product
not properly adjusted.	viscosity as instructed.

312028000 68