DISPLAYED |
| MODEL |
| HZ | MOTOR DESCRIPTION | |
|
|
|
|
|
|
|
|
| Klauber |
| 60 | Over/under gear box with a GE | |
|
|
|
|
|
|
|
FASV3+ 60 |
| Fasco/VW |
| 60 | Over/under gear box with a Fasco | |
|
|
|
|
|
|
|
FASCWR 60 |
| Fasco/VW |
| 60 | Standard gear box using a Fasco | |
|
|
|
|
|
|
|
VW/GE 60 |
| Fasco/VW |
| 60 | Standard gear box with a GE 219/242 volt motor. | |
|
|
|
|
|
|
|
EMRSN 60 |
| Emerson |
| 60 | Over/under gear box with an Emerson | |
|
|
|
|
|
|
|
BODINE 60 |
| Bodine |
| 60 | Special | |
|
|
|
|
|
|
|
|
| Klauber |
| 50 | Over/under gear box with a GE | |
FASV3+50 |
| Fasco/VW |
| 50 | Over/under gear box with a Fasco | |
|
|
|
|
|
|
|
FASCWR 50 |
| Fasco/VW |
| 50 | Standard gear box using a Fasco | |
|
|
|
|
|
|
|
VW/GE 50 |
| Fasco/VW |
| 50 | Standard gear box with a GE 219/242 volt motor. | |
|
|
|
|
|
|
|
EMRSN 50 |
| Emerson |
| 50 | Over/under gear box with an Emerson | |
|
|
|
|
|
|
|
|
|
|
|
| TABLE 6. MOTOR SELECT | |
|
|
|
|
| ||
DIP SWITCH | DIP SWITCH |
|
|
| ||
NO. 1 |
| NO. 2 |
| *MESSAGE |
| |
|
|
|
|
| ||
OFF |
| OFF | “ENJOY A FROZEN BEVERAGE” |
| ||
|
|
|
|
| ||
OFF |
| ON | NOT USED - BLANK |
| ||
|
|
|
|
| ||
ON |
| OFF | “HAVE A NICE DAY” |
| ||
|
|
|
|
| ||
ON |
| ON | “DISFRUTE UNA BEBIDA CONGELADA CARBONATADA” |
| ||
|
|
|
|
|
|
|
*For special messages, contact your local sales representative.
TABLE 7. POINT OF SALE DISPLAY MESSAGES
PROGRAMMING ‘‘WAKE UP’’ (WAKE UP TIME) INTO UNIT
‘‘WAKE UP’’ (WAKE UP TIME) may be programmed into Unit to occur any time of the day to wake Unit up (return to normal operation) after ‘‘sleep time’’ has occurred. Program ‘‘WAKE UP’’ into Unit as follows:
1.Refer to PROGRAMMING MAIN MENU SELECTIONS ONTO MESSAGE DISPLAY and bring up ‘‘WAKE UP’’ on message display. Press ‘‘DEFROST’’ (SELECT) switch to lock in on selection.
2.Press ‘‘CANCEL DEFROST’’ (ADVANCE) switch to bring up flashing hour number on display.
3.Press ‘‘CANCEL DEFROST’’ (ADVANCE) switch to advance hours on display to desired hour. Press ‘‘DE- FROST’’ (SELECT) switch to lock in hour on display.
4.After hour (time of day) has been locked in on message display, minute numbers will be flashing on display. Press ‘‘CANCEL DEFROST’’ (ADVANCE) switch to advance minute numbers to desired minutes (time of day). Press ‘‘DEFROST’’ (SELECT) switch to lock in minutes (time of day) on display.
5.Press ‘‘ERROR RESET’’ switch two times to exit from MENU SELECTIONS.
PROGRAMMING POINT OF SALE MESSAGE DISPLAY
(see Figure 4 and 7)
NOTE: Point of sale display messages may be turned off by placing No. 1 DIP SWITCH on master circuit board in “OFF” position and No. 2 DIP SWITCH in “ON” position (see Figure 4 and 5 and 7).
19 | 312028000 |
