D-Link DVA-G3340S Static IP Address for Connection WAN, Home WAN Static IP Address, This menu

Static IP Address for Connection WAN

Home > WAN > Static IP Address

When the Router is configured to use Static IP Address assignment for the WAN connection, you must manually assign a global IP Address, Subnet Mask and Gateway IP Address used for the WAN connection. Most users will also need to configure DNS server IP settings in the DNS Settings configuration menu (see below). Follow the instruction below to configure the Router to use Static IP Address assignment for the WAN connection.

To configure a Dynamic IP Address connection, perform the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose. See the table below for a description of all the settings available

in this menu. WAN Settings - Static IP

Additional settings for Static IP Address connections:

Static IP Parameters Description

Connection Type

This specifies the connection type and the encapsulation method used for your Static IP Address connection. The options available are Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, Routed IP VC-MUXor IPoA.

DVA-G3340S User Manual Page 26 of 94 V1.00 AU