1.Click in the Enable Access List option box to select it.
2.Select the action to perform on the MAC address to be specified. Choose to Allow or Ban association.
3.Type in the MAC Address in the entry field provided.
4.Click the Add button to add the MAC address to the list. The AMC address will appear listed in the table below.
5.After compiling the list of MAC addresses as desired, click the Apply button to enforce access control for the MAC addresses in the list.
To remove any MAC address from the list, click the radio button in the left column of the list for the MAC address to be removed and click the Apply button.
Configure Multiple SSID
Multiple SSID cannot be used if the access point has either WPE or WPA enabled. This must first be disabled in the Wireless menu located in the Home directory. To configure multiple SSID:
1.Disable WEP or WPA in the Wireless menu of the Home directory.
2.Click in the Enable Multiple SSID option box to select it.
3.Enter the SSID you want to add.
4.Click the Add button to add the SSID to the list.
5.Click the Apply button to enable the listed SSIDs.
To remove an SSID from the list, click the radio button in the left column of the list for the SSID to be removed and click the Apply button.
Page 71 of 94 | V1.00 AU |
