Creating Labels Using Internal Batch Software

3.5System Maintenance Screen

The third screen, System Maintenance, is used to format and copy memory modules, print test labels, and perform several other maintenance functions.

To access the screen in the label name position of the Create/Modify Label or Print Label Screens, use ALT-S. The screen will look like this:

SYSTEM MAINTENANCE

1)TEST AND FORMAT MODULE.

2)COPY MODULE.

3)METRIC ? NO.

4)PRINT TEST LABEL.

5)SYSTEM TEST LABEL.

6)EDIT MODULE NAME.

7)RESET PRINTER.

8)EXIT TO RS-232 SYSTEM.

9)PACK MODULE DATA.

ENTER NUMBER: ________

Figure 3-6 System Maintenance Menu

To exit the screen, press the Esc key. All System Maintenance Screen choices are explained below:

Test and Format Module: Used to format or reformat the memory of a Flash Module. Tests the memory module to see that it properly functions, and that it is capable of erasing and loading data.

This test destroys all existing memory module data!

Follow the prompts to perform the test.

Warning

Allegro2

55

Page 63
Image 63
Datamax Allegro 2 manual System Maintenance Screen, System Maintenance Menu