Datamax Allegro 2 manual Paper/Ribbon, Light, Switch, Darkness POT

		Getting Started
Paper/Ribbon	This light is activated when:
Light:	∙	No label and/or ribbon is detected.
	∙	The Internal Rewinder (if installed) is not
		rotating, (i.e., maximum rewind capacity has
		been reached).
Ribbon	For direct-thermal printing, (no ribbon), slide the
Switch:	switch to the ‘off’ position. For thermal-transfer
	printing, (ribbon installed), slide the switch to the
	‘on’ position.
Darkness POT:	This POT is used to fine adjust the print darkness
	due to variations in different media’s and
	printheads.

Note: Do not use this control for adjusting individual label printing jobs, rather, use the software control with the ALT-P Print Parameters Screen in the Internal Batch Mode (see Section 4), or the proper command in RS-232 mode to vary darkness of printing on a per-label-format basis.

Allegro2 7