Getting Started
Pause Button: This button allows the operator to stop printing a run of labels and then restart the job by pressing the button again. Activation of the button will:
∙Stop the print mechanism when the label printing is complete.
∙Turn on the pause light.
∙Stop the label counter, but maintain the count balance.
∙Hold all data in memory.
Pressing the button a second time will:
∙Restart the Printer.
∙Print the balance of labels on the counter unless interrupted.
∙Turn ‘off’ the pause light.
Pause Light: The pause light will turn on if any of the
following occurs:
∙The pause button is pressed.
∙A print job is canceled with the stop/cancel button.
∙A fault occurs with the cutter or rewind option.
Stop/Cancel Button:This button allows the operator to stop and cancel a run of labels in the process of being printed and continue on to the next run in the Printer’s buffer.
Feed Button: Pressing this button causes the paper to automatically advance to the first print position of the next label. On a new size label, 0 - 2 labels may feed before registration occurs.
6 | Allegro2 |
