Other Switches
Switch SW-5:Controls the label edge offset, when the switch is on, the label edge offset will default to 0250. When the switch is off, the label edge offset will default to 0220.
Switch SW-6:Present Sensor Option
Switch SW-7:Enables the Internal Batch Software Program. This program is explained in Chapter 3. There is a software command that will perform the same option as this switch; it is the STX g Command.
Switch SW-8:Controls the optional Cutter.
SW-5 | Prodigy Compatibility |
On | Prodigy |
Off | Allegro |
SW-6 | Present Sensor Option |
On | Present Sensor Enabled |
Off | Present Sensor Disabled |
SW-7 | Internal Batch Software |
On | Internal Batch Enabled |
Off | Internal Batch Disabled |
SW-8 | Cutter |
On | Cutter Enabled |
Off | Cutter Disabled |
Table 2-4 Switch Settings and Functions
