Setting Up Your Printer
To connect the Printer to EBCDIC devices, or devices with any other data encoding standard, a protocol converter must be used. A protocol converter translates the bit patterns of one standard to the bit patterns of another standard. Some protocol converters are also interface converters, combining two functions into one box. Many of these products are available from the manufacturer of your computer equipment or your local reseller. Please note that additional commands may be necessary to control the protocol converter you select for your data interface.
2.4 Switch Settings
There are eight switches located on the back of the Printer as shown in Figure
Figure 2-2 Switch Settings
20 | Allegro2 |
