DCS dCS 974, Digital to Digital Converter Set, do this:, do this:, do this:, do this:, Unlocked, do this:, AES Ref Loop, Proceed to Step, Syncing to an AES/EBU Reference

dCS 974 User Manual	Manual for Software Version 1.0x
dCS Ltd	May 2001

Syncing to an AES/EBU Reference

	If you want to synchronise your system to an AES/EBU Reference from a
	Master Clock (such as the dCS 992) or other stable source, do the following:
do this:	Set the Master Clock sample rate to match the source (probably 44.1 or
do this:	48kS/s).
	Connect either an AES/EBU or Wordclock output from the Master Clock to the
	clock input on the source equipment and ensure it is locked.
do this:	Connect another AES/EBU output from the Master Clock to the AES Ref Loop
do this:	IN connector on the dCS 974 rear panel.
	Scroll down the Sample Rate Conversion menu to Sync Source and press
	the → button. Scroll down the list to AES Loop Terminated and press Set.
	The Unlocked indicator will light for a few seconds, then turn off as the unit
	re-locks.
do this:	Proceed to Step 3.

Manual part no: DOC1241121A1 Page 14 Document No: OS-MA-A0124-112.1A1

Contact dCS on + 44 1799 531 999	email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)	web site: www.dcsltd.co.uk