dCS 974 User Manual | Manual for Software Version 1.0x |
dCS Ltd | May 2001 |
|
|
Front Panel
24BIT | OPERATION |
|
|
| |
192kS/s | Status |
| Set |
|
|
|
|
|
| Dither |
|
Power |
|
| Noise shaping |
| |
|
|
|
|
| |
DSD |
|
|
| L/R flip |
|
MEMORY |
| Phase |
| ||
Direct Stream Digital | Recall Edit | Store | Enter |
|
|
| Gain |
| |||
|
|
|
|
| |
|
|
|
| Balance | dC S |
|
|
|
| Unlocked | |
| dCS 974 D to D Converter |
|
|
| Data Conversion Systems |
Figure 18 – Front Panel
Because of the many options on the dCS 974, we have used a menu based system to control it. The hardware buttons and knobs below navigate you through it.
Power IndicatorThe LED in the top left hand corner lights when power is applied.
OPERATION buttonsThe bank of 4 buttons in the top left hand corner are the Operation buttons and are used for navigating around the menu tree:
Status | returns the display to the status information screen |
| to allow a rapid check of key settings. |
← | selects the previous (higher) menu level. |
→ | selects the next (lower) menu level. |
Set | implements the selected menu item. |
The bank of 4 buttons in the lower left hand corner are the Memory buttons and are used for storing and retrieving setups:
Recall | allows one of ten stored setups to be selected |
Store | ready for loading. |
allows one of ten locations to be selected as the | |
Edit | location for saving the current setup. |
is used to change the name of a saved setup. | |
Enter | loads or saves a setup. |
The backlit LCD display in the centre of the panel can display up to 8 lines of information.
Manual part no: DOC1241121A1 | Page 68 | Document No: |
Contact dCS on + 44 1799 531 999 | email to: more@dcsltd.co.uk |
(inside the UK replace + 44 with 0) | web site: www.dcsltd.co.uk |