dCS 974 User Manual | Manual for Software Version 1.0x |
dCS Ltd | May 2001 |
|
|
Demultiplexing a 24/96 Dual AES recording (Bit for Bit)
From 24 bit / 96kS/s | Ensure AES 1 & AES 2 |
|
|
| |||
Dual AES source | are connected correctly |
|
|
| |||
|
| AES 1 = Left data |
|
|
|
| |
|
| AES 2 = Right data |
|
|
|
| |
| AES / EBU INPUTS |
|
| AES / EBU REFERENCE LOOP | SPDIF | ||
PUSH | PUSH | PUSH | PUSH |
| PUSH | IN | OUT |
|
|
|
|
|
| ||
|
|
|
|
|
|
| RCA |
|
|
|
|
| IN | OUT |
|
AES 1 | AES 2 | AES 3 | AES 4 | AES CLK OUT | SYNC INPUT | BNC | |
|
|
|
| ||||
|
|
|
|
|
|
| TOS |
DSD / SDIF
CH1 IN | CH2 IN | REMOTE |
|
| IN |
WCLK IN | LOOP OUT |
|
|
| LOOP |
|
| OUT |
CH1 OUT | CH2 OUT | MAINS FUSE (2AT) ON OFF |
|
| |
LOOP IN | WCLK OUT |
|
AES / EBU OUTPUTS
24 bit / 96kS/s from | 24 bit / 96kS/s | 24 bit / 96kS/s |
4 independent AES outputs | from 3 independent | |
| SPDIF outputs |
|
Figure 7 – Converting dual AES 24/96 to a single wire double speed one
The dCS 974 converts a 96 kS/s 24 bit Dual AES input to a double speed 96 kS/s 24 bit signal available from any or all of the 4 AES, 2 electrical SPDIF, optical SPDIF or
do this: Connect
do this: Load the setup from Store J and set Pure Format Conversion to On, or use settings below.
do this: Output from any AES output or any of the SPDIF outputs or, using two data cables and one clock, via the
Format Conversion settings: |
|
Pure Format Conversion: | On |
Audio Input Select: | Dual AES |
Sync Source: | Audio Input |
Input Sample Rate: | Auto (96 kS/s) |
Output Sample Rate: | 96 kS/s |
Output Mode: | Normal |
AES Message Edit: | Professional On, |
| Mode: Stereophonic |
SPDIF Message Edit: | Professional On, |
| Permit On |
| Format: |
Manual part no: DOC1241121A1 | Page 23 | Document No: |
Contact dCS on + 44 1799 531 999 | email to: more@dcsltd.co.uk |
(inside the UK replace + 44 with 0) | web site: www.dcsltd.co.uk |