dCS 974 User Manual | Manual for Software Version 1.0x |
dCS Ltd | May 2001 |
A group of LED indicators to the right of the LCD display gives a level of status indication:
Dither | is lit if any Dither is selected. |
| Noise shaping | is lit if any Noise Shaping is selected. |
| L/R flip | indicates that the channels are flipped. |
Two Phase LEDs | indicate if either or both channels are phase |
| Gain | inverted. |
is lit if the setting is other than unity gain (i.e. 0dB). | |
| Balance | is lit if the channel balance is shifted from centre. |
Unlocked | is lit if the unit is not locked to a valid digital input. |
Turn the knob to move up down the menu tree, adjust parameter values or edit store names. You may select whether clockwise rotation moves the cursor up or down - see the section on Display Customise, page 50. The unit is shipped with the cursor moving downwards by clockwise rotation of the knob and all instructions in this manual refer to a unit in this configuration. We recommend turning the knob at a steady speed, rather than trying to turn it as fast as possible.
Manual part no: DOC1241121A1 | Page 69 | Document No: |
Contact dCS on + 44 1799 531 999 | email to: more@dcsltd.co.uk |
(inside the UK replace + 44 with 0) | web site: www.dcsltd.co.uk |