dCS 974 User Manual

Manual for Software Version 1.0x

dCS Ltd

May 2001

 

 

Setups and Locking the Front Panel

Storing a Setup

The dCS 974 features 12 non-volatile user programmable setup stores, labelled Store 0 to Store 11. These are accessed by the rotary control and the block of four MEMORY buttons on the lower left hand corner of the unit.

First set up the unit as required then press the Store button. If nothing has been stored yet, the display will look like this:

You can scroll up and down the list using the rotary encoder and reveal the other five stores. Scroll to the required store (e.g. Store 4) and press the Edit button. The display changes to:

To edit the first character in the name, press the Edit button again. The display changes - an alphanumeric screen is displayed, with the current store name at the top, and all of the legal characters below it, as follows:

Turn the knob to move the edit block backwards and forwards through the

available characters. The arrow ↑ indicates which character you are editing, and the character is updated in real time as you move the edit cursor.

The ↵ symbol represents <End>. When you have finished editing the character, press the Edit button to return to the previous screen and select the next character to edit. Names can be up to 15 characters long, plus an <End> character to mark the end of the name. If all 15 characters are used and you attempt to edit the <End> character in the 16th slot, the Edit button has no effect. Inserting <End> half way through a name will complete the name there, deleting the right hand portion.

Manual part no: DOC1241121A1

Page 61

Document No: OS-MA-A0124-112.1A1

Contact dCS on + 44 1799 531 999

email to: more@dcsltd.co.uk

(inside the UK replace + 44 with 0)

web site: www.dcsltd.co.uk