dCS 974 User Manual | Manual for Software Version 1.0x |
dCS Ltd | May 2001 |
do this: Press the Recall button. When the display changes to the Recall screen, press the Recall button again.
The display will change to:
do this: Select Store A (the default setting) with the rotary control and press the Enter button.
A message window will appear in the display to confirm that the unit is reading the setup. Then, when complete, the message will go away, the unit will lock and the Unlocked LED will go out. The display then shows the status screen for the default setup as overleaf if you have a 96 kS/s source connected to AES 1 – otherwise the left hand number will adjust to what you have connected.
The (converted) input signal will now be available at all of the outputs.
do this: Connect the output of your choice to the input of a 44.1 kS/s recorder, DAC or other equipment you wish to drive. It will now lock to the dCS 974.
Note that all the outputs are active when the dCS 974 is locked. They may all be connected to external equipment simultaneously if required. Similarly, all of the inputs may be connected as the active one will be selected by the Audio Input Select menu.
Now you will need to familiarise yourself with how the control software and menu system work.
do this: Read the short section on Navigating through the Menu – what the On- Screen symbols mean, page 36 so you know how the buttons and cursor work.
You may also find it convenient to refer to the Quick Start Guide while you are getting to know the unit.
Manual part no: DOC1241121A1 | Page 111 | Document No: |
Contact dCS on + 44 1799 531 999 | email to: more@dcsltd.co.uk |
(inside the UK replace + 44 with 0) | web site: www.dcsltd.co.uk |