w w w . d e l l . c o m s u p p o r t . d e l l . c o m
Then follow the instructions that came with the printer to connect it to the computer. If no information is provided, see the following sections.
Parallel Printer
1Turn off the computer (see page 16).
NOTICE: Use only a standard IEEE parallel cable measuring 3 m (10 ft) or less to connect the printer to the computer. Use of a nonstandard cable may prevent the printer from working.
2Attach the parallel printer cable to the parallel connector on the computer and tighten the two screws. Attach the cable to the parallel connector on the printer and snap the two clips into the two notches.
screws (2)
parallel connector on computer
parallel connector on printer
clips (2)
parallel printer cable
notches (2)
3Turn on the printer and then turn on the computer. If the Add New Hardware Wizard window appears, click Cancel.
4Install the printer driver if necessary (see page 15).
14
Setting Up