Replacing the Computer Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions on page 7.
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network jack.
1Turn off the computer and devices, and disconnect them from their electrical outlets.
2Briefly press the power button.
Pressing the power button when the computer is not connected to an electrical outlet discharges residual electricity and can help prevent system board damage.
3Make sure that all cables are connected. Fold cables out of the way.
4Make sure that no tools or extra parts (like screws) are left inside the computer.
5From the back of the computer, slide the cover forward until it locks into place.
6Tighten the thumbscrew on the back of the computer (see page 42).
Adding Parts
71