Make sure that the card is fully seated and that its bracket is within the card slot.
fully seated | not fully seated |
bracket within slot
bracket caught outside of slot
6Secure the bracket on the end of the card with the screw you removed in step 2.
7Connect any cables required for the card as described in the card documentation.
8Replace the computer cover (see page 71).
NOTICE: To connect a network cable, first plug the cable in to the network jack and then plug it in to the computer.
9Plug your computer and devices into their electrical outlets, and turn them on.
10Install any drivers required for the card as described in the card documentation.
Adding Parts
47
