If you have to repeatedly reset time and date information after turning on the computer, replace the battery.

CAUTION: A new battery can explode if it is incorrectly installed. Replace the 3-V CR2032 battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

1Record all the screens in the system setup program so that you can restore the correct settings in step 6.

2Remove the computer cover (see page 42).

NOTICE: To avoid damage to the system board while you pry the battery loose, be sure to insert the plastic screwdriver between the battery and the socket (not the system board).

3Locate the battery socket (see page 44) and pry the battery out of its socket with your fingers or with a plastic screwdriver.

4Insert the battery into the socket with the side labeled “+” facing up.

battery

battery socket (BATTERY)

5Replace the computer cover (see page 71), and plug your computer and devices into their electrical outlets.

6Access the system setup program and restore the settings you recorded in step 1.

Appendix

81

Page 81
Image 81
Dell 4100 manual Battery Battery socket Battery