Scenario 4: Comput er connected wirelessly to a printer without Internet acc ess
A computer is directly connected to a printer without going through a wireless router.
This configuration is referred to as an ad hoc network.
The network has no connection to the Internet.
Note: Most computers can connect to only one wireless network at a time. If you acces s the Internet over a wireless
connection, you will lose Internet access if you are connected to an ad hoc network.
Why do I need an installation cable?
When setting up the printer on your wireless network, the printer will need to temporarily connect to a computer
using the installation cable. This temporary connection is used to set up the wireless settings of the printer.
The installation cable connects to a rectangul ar USB port on the installing computer and the square USB port on the
printer.
How do I attach the installation c able?
The installation cable attaches to a USB port on the computer and to the square connector on the back of the printe r.
This connection allows you to configure the printer for a networked or locally attached installation.
1Attach the large, rectangular connector to an y USB port on your computer. USB ports may be on the front or the
back of the computer, and may be horizontal or vertical.
Networking
64