Adding and Replacing Parts 133
b
Release the card by pressing the metal securing tabs until the card pops up slightly.
c
Lift the card out of its connector.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and
realign the card.
5
Install the card:
NOTICE: To avoid damaging the card, ensure that the antenna cable is not under the card when you click the card
into place.
a
Align the card with the connector at a 45-degree angle, and press the card into the connector until
it clicks.
b
Connect the antenna cable to the antenna connector on the mini-card by matching the color of
the cable to the color of the triangle above the connector. Connect the main cable (white) to the
antenna connector with the white triangle. Connect the auxiliary cable (black) to the antenna
connector with the black triangle.
NOTE: If your computer has a gray cable, connect it to the connector with the gray triangle, if one is available
on your card.
6
Replace the memory cover. See "Memory" on page129.
7
Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical
outlet.
8
Turn on the computer.
1mini card 2metal securing tabs (2)
1
2
book.book Page 133 Tuesday, February 13, 2007 1:50 PM