Dell PP20L owner manual Keyboard, hinge cover, scribe

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

1Follow the procedures in "Before You Begin" on page 109.

2Remove the hinge cover.:

a Open the display all the way (180 degrees) so that it lies flat against your work surface.

NOTICE: To avoid damage to the hinge cover, do not lift the cover on both sides simultaneously.

bInsert a scribe into the indent to lift the hinge cover on the right side.

cEase the hinge cover up, moving from right to left, and remove it.

NOTE: When replacing the hinge cover, first insert the left edge and then press from left to right until the cover snaps into place.

1

2

1 hinge cover 2 scribe

Keyboard

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

Adding and Replacing Parts

119