12
3
1 system board connector | 2 | antenna cables (2) | 3 | antenna cable connectors (2) |
Coin-Cell Battery
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.
1Follow the procedures in "Before You Begin" on page 109.
2Remove the hinge cover. See "Hinge Cover" on page 118.
3Remove the keyboard. See "Keyboard" on page 119.
4Insert a plastic scribe into the guide on the side of the
124