5Run the system board tests in the system diagnostics. See "Executing System Diagnostics" on page 150.

If the tests fail, see "Getting Help" on page 165.

Troubleshooting the System Battery

Problem

System message indicates a problem with the battery.

System Setup program loses system configuration information.

System date and time do not remain current.

NOTE: If the system is turned off for long periods of time (for weeks or months), the NVRAM may lose its system configuration information. This situation is caused by a defective battery.

Action

1Re-enter the time and date through the System Setup program. See "Using the System Setup Program" on page 41.

2Remove power from the system and disconnect it from the electrical outlet for at least one hour.

3Reconnect the system to the electrical outlet and turn on the system.

4Enter the System Setup program.

If the date and time are not correct in the System Setup program, replace the battery with a CR2032 battery only. See "System Battery" on page 108.

If the problem is not resolved by replacing the battery, see "Getting Help" on page 165.

NOTE: Some software may cause the system time to speed up or slow down. If the system seems to operate normally except for the time kept in the System Setup program, the problem may be caused by software rather than by a defective battery.

136

Troubleshooting Your System

Page 136
Image 136
Dell XK946 manual Troubleshooting the System Battery, 136