Dell YH242 owner manual Installing a Media Card Reader, 115

Installing a Media Card Reader

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

1Follow the procedures in "Before You Begin" on page 77.

2Lay the computer on its side so that the system board is on the bottom of the inside of the computer.

3Remove the computer cover (see "Removing the Computer Cover" on page 78).

4Remove the drive panel (see "Removing the Drive Panel" on page 100).

5Remove the drive panel insert (see "Removing the Drive-Panel Insert" on page 101).

6Remove the Media Card Reader from its packaging.

7Remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive.

1

2

1 Media Card Reader 2 screws (4)

8Gently slide the drive into place until you feel a click or feel the drive securely installed.

NOTE: Ensure that the Media Card Reader is installed before connecting the USB cable.

Removing and Installing Parts

115