Dell YH242 owner manual Enabling the QRT Feature in System Setup

Enabling the QRT Feature in System Setup

The QRT drivers must be installed before the Quick Resume feature becomes active. The QRT drivers are installed when this option is ordered. Also, Quick Resume is enabled in system setup when this feature is ordered.

1Enter system setup (see "Entering System Setup" on page 127).

2Press the arrow keys to highlight the Power Management menu option, then press <Enter> to access the menu.

3Press the up- and down-arrow keys to highlight the Quick Resume option, then press <Enter> to access the menu.

4Press the left- and right-arrow keys to highlight the On option, and then press <Enter> to enable the Quick Resume feature.

Enabling the QRT Feature in the Operating system

1Click the Start button, then click Control Panel.

2Click the Away tab.

3Ensure that the check boxes for Enable away mode and Options are checked.

4Click the Advanced tab.

5From the When I press the power button on my computer drop-down menu, select Do Nothing.

6From the When I press the sleep button on my computer drop-down menu, select Do Nothing.

Optimizing Performance

47