Mounting and Commissioning
Connect the Eumex 704PC LAN to a separate 230 V~ mains circuit. This prevents the communications system from being affected by possible short circuits in any other household equipment.
We recommend you to install a surge protector for protection against sudden high voltages such as those sometimes occurring during thunderstorms. Consult your electrician or Deutsche Telekom for advice.
Choosing a Location for Your Eumex 704PC LAN
You can simply place the Eumex 704PC LAN on a solid surface, e.g. a table. Please note that under certain circumstances the rubber pads on the base of the Eumex 704PC LAN can leave unseemly marks on furniture.
Tools for Wall Mounting
You will require the following tools for wall mounting:
•6 mm masonry drill bit (the type of drill bit depends on the type of wall)
•Hammer or percussion drill
•Screwdriver (to fit the screws supplied)
Get the rawlplugs, screws and drilling template (all supplied) ready before you start mounting the device.
Wall Mounting
aMake sure that there are no pipes, cables or similar objects running through the wall near the planned drill holes, as these could be damaged.
Use the drilling template supplied and a
Insert the rawlplugs and screw the screws into the wall so that a space of 4 mm between the head of the screw and the wall remains.
Place the mounting holes in the base of the Eumex 704PC LAN over the screws, and pull downwards slightly.
9
