Deutsche Telekom manual Connecting Devices, Connecting the Eumex 704PC LAN to T-ISDN

Connecting Devices

Connecting the Eumex 704PC LAN to T-ISDN

Regulations permit the general public to connect the Eumex 704PC LAN to the Deutsche Telekom network. You can thus connect the Eumex 704PC LAN yourself if the following conditions are met:

•The device may only be connected to a basic Euro-ISDN connection. Do not under any circumstances connect it to lines or equipment in the analogue network. Never connect it to an ISDN tie line. Failure to observe these conditions can result in faulty operation or damage to the Eumex 704PC LAN as well as to the network.

•The basic Euro-ISDN connection must be used in conjunction with a network ter- minator (NTBA) as supplied by Deutsche Telekom. The connection must be the multi-terminal type.

Insert the Eumex 704PC LAN connector cable in the corresponding socket of the NTBA. Insert the other end in the socket marked "ISDN" on the bottom left-hand side of the Eumex 704PC LAN.

Connecting the Eumex 704PC LAN to T-DSL

Connect the devices to one another as shown in the diagram. Please refer to the installation, mounting and commissioning guides for details on the splitter (broad- band connector unit) and the modem (broadband network terminator).

Splitter (BBAE)

NTBBA

ADSL

NTBA

Modem (NTBBA)

Eumex 704PC

	LAN	(Ethernet
		or USB)
T-ISDN	PC	T-DSL

10BaseT

In this configuration, both ISDN B-channels as well as the T-DSL connection are avail- able simultaneously. You can thus surf in the Internet (via T-DSL) and still have two lines free for making telephone calls and fax transmissions.

11