Dynex DX-E401 manual Configuring the router, To access the Web-based configuration utility

Configuring the router 13

16If you selected PPP over Ethernet (PPPoE), the Set PPPoE screen opens.

Note - Make sure that you remove any existing PPPoE client software installed on your computers.

17Type the Username and Password provided to you by your ISP, and type the Service Name if your ISP uses a service name for the PPPoE connection.

18Click Next. The Setup Completed screen opens.

19Click Restart. The router saves the changes and reboots.

20Click Close. The router setup is now complete, and you should be able to access the Internet.

Configuring the router

Whenever you want to reconfigure your network or the router, you can access the Web-based configuration utility by opening your Web browser and typing in the IP Address of the router. The default IP Address is: 192.168.0.1 (also see Start-up and Log in on page 8).

To access the Web-based configuration utility:

1Open your Web browser.

2Type in the IP Address of the router (http://192.168.0.1).