Dynex DX-E401 Name, The name referencing the virtual service, Private IP, Private Port, Schedule

Configuring the router 23

2Click the Advanced tab, then click Virtual Server. The Virtual Server screen opens.

	3 Click Enabled, then enter the following settings, as appropriate:
Field		Description
Name		The name referencing the virtual service.
Private IP		The IP address of the server computer in the LAN (Local Area Network) that will
		be providing the virtual services.
Protocol Type		The protocol used for the virtual service.
Private Port		The port number of the service used by the private IP computer.
Public Port		The port number on the WAN (Wide Area Network) side that will be used to
		access the virtual service.
Schedule		The times when the virtual service will be enabled. The schedule may be set to
		Always, which will allow the particular service to always be enabled. If it is set
		to Time, select the time frame for the service to be enabled. If the system time is
		outside of the scheduled time, the service will be disabled.